Real Time Clock RTC

From HiveTool
Revision as of 23:25, 23 April 2017 by Paul (talk | contribs)
Jump to: navigation, search

Adding a RTC to the Hive Interface board.



This module almost plugs in to J? on the Hive Interface board. A minor modification is required.

  1. The ground on C? must be moved.
  2. To be safe, the 4th pin of a 1x5 male header should be removed.
  3. Solder the 1x5 header in J7 BUT SHIFT IT DOWN ONE PIN.


These instructions work, but are not complete in that the RTC is not set to the ntp servers when ntp servers are available: