NRF52840 Thread NCP

From HiveTool
Revision as of 16:15, 13 January 2019 by Paul (talk | contribs) (Set up the border router on the Pi:)
Jump to: navigation, search

Pi Border Router with nRF52840 thread NCP!topic/openthread-users/9TFIATWWrxw

Install Network Co Processor (NCP) code on nRF52

Download nRF Connect program.


Downloaded the nRF5 SDK for Thread and Zigbee 2.0.0

Write the NCP hex file to the dongle.

Set up the border router on the Pi:

You need both border router and wpantund:

git clone
cd borderrouter
.configure --enable-debug

git clone
cd wpantund
./configure --sysconfdir=/etc --enable-debug
make -j4  // -j4 (use 4 cores) may have locked it up
sudo make install
git clone

./configure --enable-ncp --enable-ftd --enable-commissioner --enable-joiner --enable-border-agent --enable-border-router --enable-commissioner --enable-udp-forward