Difference between revisions of "User:Adrian"

From HiveTool
Jump to: navigation, search
(Aluminum hive scale base with 4 load cells and USB interface)
 
m
Line 4: Line 4:
 
The scale frame perimeter matches the Langstroth hive body and sits under a standard wooden hive base.
 
The scale frame perimeter matches the Langstroth hive body and sits under a standard wooden hive base.
 
Four 1/4" thick load compression pads (not shown) at each corner are used to equalize the load across the four Zemic L6D 30 kG load cells (Ebay $19.99).
 
Four 1/4" thick load compression pads (not shown) at each corner are used to equalize the load across the four Zemic L6D 30 kG load cells (Ebay $19.99).
[[File:http://hivetool.org/w/index.php?title=File:Web_Scale_Base_Top.jpg]]
+
[[File:http://hivetool.org/w/images/c/cb/Web_Scale_Base_Top.jpg]]
[[File:http://hivetool.org/w/index.php?title=File:Scale_Base_Corner.jpg]]
+
[[File:http://hivetool.org/w/images/7/71/Scale_Base_Corner.jpg]]

Revision as of 22:25, 11 August 2014

I have been working on a hive scale base utilizing the Phidgets #1046 4 cell USB bridge (cost $90). The 24 bit USB bridge is supplied with numerous software drivers and a basic PC interface. We constructed a rigid aluminum frame using 1.25" X .75" solid aluminum bar stock. The scale frame perimeter matches the Langstroth hive body and sits under a standard wooden hive base. Four 1/4" thick load compression pads (not shown) at each corner are used to equalize the load across the four Zemic L6D 30 kG load cells (Ebay $19.99). File:Http://hivetool.org/w/images/c/cb/Web Scale Base Top.jpg File:Http://hivetool.org/w/images/7/71/Scale Base Corner.jpg