Talk:XXX: Load Hivetool on the Pi

From HiveTool
Revision as of 04:38, 9 March 2016 by Paul (talk | contribs) (Paul moved page Talk:Load Hivetool on the Pi to Talk:XXX: Load Hivetool on the Pi without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

CHANGE: 6. Set the Ethernet parameters and DNS servers

FROM:

To set a static IP if needed for port forwarding through the firewall.

  1. set static ip for port forwarding
    sudo vi /etc/network/interfaces:
    iface eth0 inet dhcp
    iface eth0 inet static
    address 192.168.254.31
    netmask 255.255.255.0
    gateway 192.168.254.254
  2. Set the dns Servers
    /etc/network/interfaces
    /etc/dhcp/dhclient.conf

TO:

  1. At the bottom of /etc/dhcpcd.conf define your static IP setup. Of course the actual values have to match your network setup
interface eth0
static ip_address=192.168.254.31/24
static routers=192.168.254.254
static domain_name_servers=192.168.254.254 8.8.8.8

From https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=124423