Difference between revisions of "Sensors"

From HiveTool
Jump to: navigation, search
Line 2: Line 2:
 
<gallery>
 
<gallery>
 
File:Hx711 version2c.jpg |[[Sensors: Hx711|Weight<br>HX711]]
 
File:Hx711 version2c.jpg |[[Sensors: Hx711|Weight<br>HX711]]
File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|CZL602X Load Cell]]
+
File:CZL602x.jpg|[[Sensors: CZL602X Load Cell|Weight<br>CZL602X Load Cell]]
 
File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]]
 
File:Dht22 wiring1.jpg|[[Sensors: DHT22|Temperature/Rh<br> DHT22]]
 
File:Wiring TSL2591 Lux.jpg|[[Sensors: TSL2591|Lux<br>TSL2591]]
 
File:Wiring TSL2591 Lux.jpg|[[Sensors: TSL2591|Lux<br>TSL2591]]

Revision as of 18:31, 7 March 2017

Different platforms support different sensors. Recommended sensors change as new ones are added. Check back before you buy.

Platform

Most of the current development is on the Pi but other platforms are added as they are developed. The PC (laptop or desktop mother board) is included for legacy support.

Pi

The Pi has digital GPIO lines which allow easy interfacing to digital sensors. When terminated according to the sensor wiring instructions, these sensors will plug into the Hive Interface Board


Pi Recommended Sensors
Variable Sensor Specs Cost
Weight HX711
Temp/RH DHT22
Temp 1-Wire
Lux TSL2591
Rain RainWise
Video PiCam
Audio


The sensors listed below for use with a PC are also supported.

PC

With Laptops and PC motherboards, IO is usually limited to USB and serial devices.

  1. Adam Equipment
  2. TEMPerHUM
  3. USB video camera
  4. USB microphone
  5. Phidget