How To

From HiveTool
Jump to: navigation, search

How to build a hive monitoring system.

Platform

Desktop, laptop or Raspberry Pi will work. We seem to be moving to a standard model based on the Raspberry Pi: a solar powered, wi-fi connected, web appliance.

Remote Into Raspberry Pi

Monitoring stations will by necessity be out in the weather, which requires that they be sealed from the elements. However, this makes them difficult to access if you want to make any changes to the software or just log in to check on things. This guide goes over different methods of connecting to your Pi without plugging anything in.

Power Supply

AC power is the least expensive but not the safest, nor does it provide lightning protection. Use a Ground Fault Interrupter (GFI) and make sure the AC connections are well taped up and waterproof or the GFI will trip when it rains.

Solar power will nearly double the cost of the system and requires more work in wiring the power supply and battery charger. The cost of the battery and solar panel can be reduced by minimizing the system's power consumption.

Resources

  1. Build a scale based on the Pi and HX711 (latest).
  2. Build a scale based on the Pi and HX711 (old).
  3. Build a scale based on the Pi and PhidgetBridge AD7193.
  4. Solar Design construction notes.
  5. How to load hivetool on the Pi provides detailed software installation instructions.
  6. Scale Communication Help.
  7. User Manual for the Model A POE. Developed for the South Carolina Hive Instrumentation Project
  8. Troubleshooting Guide