Difference between revisions of "Hardware: Hive Interface Board 4"

From HiveTool
Jump to: navigation, search
Line 6: Line 6:
 
==Features==
 
==Features==
 
*AD7124 24 bit ADC with 8 differential inputs
 
*AD7124 24 bit ADC with 8 differential inputs
*Instrumentation Amplifiers for load cells
+
 
 +
Supports 4 load cells or four scales with 4 loads cells in parallel.
 +
 
 +
*Instrumentation Amplifiers for load cells.
 +
 
 +
Maybe not necessary.  Preliminary tests using the EVAL-AD7124-8 board are able to resolve to .001 lbs (.45 g) without external aplifiers.
 +
 
 
*Bluetooth Low Energy (BLE) support using a Nordic nRF52
 
*Bluetooth Low Energy (BLE) support using a Nordic nRF52
 
*BMD301 32 bit ARM processor with GPIO lines and eight 16 bit ADC inputs
 
*BMD301 32 bit ARM processor with GPIO lines and eight 16 bit ADC inputs
 
*40 pin header plug into a Pi
 
*40 pin header plug into a Pi
 +
 +
 
*two coin cells to power the BMD301
 
*two coin cells to power the BMD301
  

Revision as of 05:24, 25 November 2017

Summary

Can operate with the Pi or as a standalone Bluetooth Low Energy (BLE) device. Replaces the HX711 single channel ADC with an 8 channel.


Features

  • AD7124 24 bit ADC with 8 differential inputs

Supports 4 load cells or four scales with 4 loads cells in parallel.

  • Instrumentation Amplifiers for load cells.

Maybe not necessary. Preliminary tests using the EVAL-AD7124-8 board are able to resolve to .001 lbs (.45 g) without external aplifiers.

  • Bluetooth Low Energy (BLE) support using a Nordic nRF52
  • BMD301 32 bit ARM processor with GPIO lines and eight 16 bit ADC inputs
  • 40 pin header plug into a Pi


  • two coin cells to power the BMD301


  • BMD301 (Nordic nRF52) can be programmed via the Pi.


Data Sheets

AD7124-8 (pdf)


http://www.analog.com/en/design-center/design-tools-and-calculators/converter-tools.html