Difference between revisions of "Hardware: Hive Interface Board 1.0"
(Created page with "We will soon release ver 1.0 of the Hive Interface Board. This should be the final release of this product.") |
|||
| Line 1: | Line 1: | ||
| − | + | Ver 1.0 of the Hive Interface Board. As suggested by the 1.0 designation, this should be the final release of this design. | |
| + | |||
| + | ==Features== | ||
| + | *Add [[Real Time Clock RTC | Real Time Clock (RTC)]] support so DS3231 will plug into header H2 without modification. | ||
| + | *Change 1-Wire connection to Pi's default 1-Wire GPIO pin. | ||
| + | *Added Chip Enable signal to SPI bus signals on H2. | ||
| + | * | ||
| + | |||
| + | == | ||
Revision as of 03:47, 30 May 2018
Ver 1.0 of the Hive Interface Board. As suggested by the 1.0 designation, this should be the final release of this design.
Features
- Add Real Time Clock (RTC) support so DS3231 will plug into header H2 without modification.
- Change 1-Wire connection to Pi's default 1-Wire GPIO pin.
- Added Chip Enable signal to SPI bus signals on H2.
==
