Difference between revisions of "Frame: Vacuum Formed Frame: A Plastic/Aluminum Hybrid"

From HiveTool
Jump to: navigation, search
(Vacuum Formed Frame Option: Development)
m
 
Line 1: Line 1:
'''OVERVIEW:'''<br>
+
[[File:VacuumFormFinish1.JPG|thumb|right|400px|'''Bottom view of Vacuum Formed Plastic/Aluminum Hybrid Frame''']]
 +
==OVERVIEW==
 
The vacuum formed frame utilizes a rectangular plastic hive rail with a reinforced aluminum undercarriage.  The general concept behind this scale was to produce an affordable light-weight scale that was able to accommodate both ten frame and eight frame Langstroth beehives.  An additional aluminum undercarriage was added as extra reinforcement was needed to support the weight of the cantilevered load cells.   
 
The vacuum formed frame utilizes a rectangular plastic hive rail with a reinforced aluminum undercarriage.  The general concept behind this scale was to produce an affordable light-weight scale that was able to accommodate both ten frame and eight frame Langstroth beehives.  An additional aluminum undercarriage was added as extra reinforcement was needed to support the weight of the cantilevered load cells.   
  
  
'''PRODUCTION:'''<br>
+
==PRODUCTION==
 
Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine.  The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements.  After the plastic form was produced additional work was done to remove the unneeded flashings.  Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells.
 
Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine.  The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements.  After the plastic form was produced additional work was done to remove the unneeded flashings.  Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells.
  
  
'''SCALE LOCATION:'''<br>
+
==SCALE LOCATION==
 
HiveTool Scale: [http://hivetool.org/db/hive_stats.pl?hive_id=94 Waypoint01]
 
HiveTool Scale: [http://hivetool.org/db/hive_stats.pl?hive_id=94 Waypoint01]
  
 +
<br clear=all>
  
'''DEVELOPMENT AND FABRICATION PHOTOS:'''<br>
+
==DEVELOPMENT AND FABRICATION PHOTOS==
<gallery>
+
<gallery mode="packed" heights=250px>
 
File:ScaleMoldTesting2.JPG|Test drilling for wooden mold creation|alt=alt language
 
File:ScaleMoldTesting2.JPG|Test drilling for wooden mold creation|alt=alt language
 
File:ScaleMold1.JPG|Creation and drilling of wooden mold|alt=alt language
 
File:ScaleMold1.JPG|Creation and drilling of wooden mold|alt=alt language
 
File:VacuumFormDuplicates.JPG|Plastic vacuum formed hive rails arrive|alt=alt language
 
File:VacuumFormDuplicates.JPG|Plastic vacuum formed hive rails arrive|alt=alt language
 
File:VacuumForm1.JPG|Plastic vacuum formed hive rail|alt=alt language
 
File:VacuumForm1.JPG|Plastic vacuum formed hive rail|alt=alt language
 
</gallery>
 
<gallery>
 
 
File:VacuumForm2.JPG|Removal of excess/unneeded plastic|alt=alt language
 
File:VacuumForm2.JPG|Removal of excess/unneeded plastic|alt=alt language
 
File:VacuumFormBars1.JPG|Creation of aluminum undercarriage bars|alt=alt language
 
File:VacuumFormBars1.JPG|Creation of aluminum undercarriage bars|alt=alt language
 
File:VacuumFormBars1.5.JPG|Aluminum undercarriage bars complete|alt=alt language
 
File:VacuumFormBars1.5.JPG|Aluminum undercarriage bars complete|alt=alt language
 
File:VacuumFormBars3.JPG|Installation of aluminum bars and load cells|alt=alt language
 
File:VacuumFormBars3.JPG|Installation of aluminum bars and load cells|alt=alt language
 
</gallery>
 
<gallery>
 
 
File:VacuumFormFinish1.JPG|Picture of the finished product - Undercarriage|alt=alt language
 
File:VacuumFormFinish1.JPG|Picture of the finished product - Undercarriage|alt=alt language
 
File:VacuumFormFinish2.JPG|Picture of the finished product - Topside|alt=alt language
 
File:VacuumFormFinish2.JPG|Picture of the finished product - Topside|alt=alt language
Line 35: Line 31:
  
  
'''PARTS LIST:'''<br>
+
==PARTS LIST==
 
Due to the complexity and specialized techniques utilized in the creation of this scale a parts list is not available for this design.
 
Due to the complexity and specialized techniques utilized in the creation of this scale a parts list is not available for this design.
  
  
'''PROS/CONS/AVAILABILITY:'''<br>
+
==PROS/CONS/AVAILABILITY==
 
The vacuum formed plastic scale is currently undergoing testing for weather durability and accuracy as it is light weight and seemingly sturdy.  Initially the vacuum formed scale was an option for mass production however, due to the size of the scale shipping costs may negate any cost cutting use of plastic over other light weight options with a smaller footprint.
 
The vacuum formed plastic scale is currently undergoing testing for weather durability and accuracy as it is light weight and seemingly sturdy.  Initially the vacuum formed scale was an option for mass production however, due to the size of the scale shipping costs may negate any cost cutting use of plastic over other light weight options with a smaller footprint.
  
  
'''CREATION CREDIT:'''<br>
+
==CREATION CREDIT==
 
Ken Hill - [http://www.khill.com K-Hill Inc.]<br>
 
Ken Hill - [http://www.khill.com K-Hill Inc.]<br>
 
David Hawa[http://hivetool.org/w/index.php?title=User:David - HiveTool]
 
David Hawa[http://hivetool.org/w/index.php?title=User:David - HiveTool]

Latest revision as of 05:25, 16 March 2017

Error creating thumbnail: File missing
Bottom view of Vacuum Formed Plastic/Aluminum Hybrid Frame

OVERVIEW

The vacuum formed frame utilizes a rectangular plastic hive rail with a reinforced aluminum undercarriage. The general concept behind this scale was to produce an affordable light-weight scale that was able to accommodate both ten frame and eight frame Langstroth beehives. An additional aluminum undercarriage was added as extra reinforcement was needed to support the weight of the cantilevered load cells.


PRODUCTION

Production of this scale started out by creating a very accurate wooden mold that was able to be used in a commercial vacuum forming machine. The plastic used was 1/4" thick and possesses UV resistant properties that could handle the exposure to weather elements. After the plastic form was produced additional work was done to remove the unneeded flashings. Holes were drilled and aluminum bars were cut to size and added to properly secure the load cells.


SCALE LOCATION

HiveTool Scale: Waypoint01


DEVELOPMENT AND FABRICATION PHOTOS


PARTS LIST

Due to the complexity and specialized techniques utilized in the creation of this scale a parts list is not available for this design.


PROS/CONS/AVAILABILITY

The vacuum formed plastic scale is currently undergoing testing for weather durability and accuracy as it is light weight and seemingly sturdy. Initially the vacuum formed scale was an option for mass production however, due to the size of the scale shipping costs may negate any cost cutting use of plastic over other light weight options with a smaller footprint.


CREATION CREDIT

Ken Hill - K-Hill Inc.
David Hawa- HiveTool