Difference between revisions of "Frame: The Thrifty-Bee Scale: A low-cost All Aluminum Scale"
(Created page with "thumb|right|400px|'''Bottom view of Vacuum Formed Plastic/Aluminum Hybrid Frame''' ==OVERVIEW== The HawaUBee Scale utilizes all aluminum constructi...") |
|||
Line 1: | Line 1: | ||
− | [[File:HawaUbeeScale7.JPG|thumb|right|400px|''' | + | [[File:HawaUbeeScale7.JPG|thumb|right|400px|'''A Top View of the HawaUbee Scale Design''']] |
==OVERVIEW== | ==OVERVIEW== | ||
The HawaUBee Scale utilizes all aluminum construction consisting of angle and flat material. This frame was designed keep production, material, and shipping costs to a minimum. The HawaUBee Scale is a light weight durable scale that requires only a screw driver to assemble. This scale is composed of 4 main pieces, 2 identical aluminum angle pieces act as the hive rails and 2 identical cross members constructed of flat aluminum stock. This scale may qualify as a production candidate in the future however, if you would like to construct this scale on your own I have uploaded a .pdf document with the measurements that will accommodate a 10 Frame Langstroth Beehive. | The HawaUBee Scale utilizes all aluminum construction consisting of angle and flat material. This frame was designed keep production, material, and shipping costs to a minimum. The HawaUBee Scale is a light weight durable scale that requires only a screw driver to assemble. This scale is composed of 4 main pieces, 2 identical aluminum angle pieces act as the hive rails and 2 identical cross members constructed of flat aluminum stock. This scale may qualify as a production candidate in the future however, if you would like to construct this scale on your own I have uploaded a .pdf document with the measurements that will accommodate a 10 Frame Langstroth Beehive. | ||
Line 14: | Line 14: | ||
==DEVELOPMENT AND FABRICATION PHOTOS== | ==DEVELOPMENT AND FABRICATION PHOTOS== | ||
<gallery mode="packed" heights=250px> | <gallery mode="packed" heights=250px> | ||
− | File:HawaUbeeScale1.JPG| | + | File:HawaUbeeScale1.JPG|Cutting Aluminum Angle for Hive Rails|alt=alt language |
− | File:HawaUbeeScale2.JPG|Creation | + | File:HawaUbeeScale2.JPG|Creation of a drilling jig|alt=alt language |
− | File:HawaUbeeScale3.JPG| | + | File:HawaUbeeScale3.JPG|Drilling holes in the Hive Rails|alt=alt language |
− | File:HawaUbeeScale4.JPG| | + | File:HawaUbeeScale4.JPG|All Hive Assembly Pieces (stacked)|alt=alt language |
− | File:HawaUbeeScale5.JPG| | + | File:HawaUbeeScale5.JPG|Hive Rails and Cross Members (separated)|alt=alt language |
− | File:HawaUbeeScale6.JPG| | + | File:HawaUbeeScale6.JPG|Hive Rails and Cross Members (layout)|alt=alt language |
− | File:HawaUbeeScale7.JPG| | + | File:HawaUbeeScale7.JPG|Side View - Assembled|alt=alt language |
− | File:HawaUbeeScale8.JPG| | + | File:HawaUbeeScale8.JPG|Top View - Assembled|alt=alt language |
− | File:HawaUbeeScale9.JPG| | + | File:HawaUbeeScale9.JPG|Undercarriage - Assembled|alt=alt language |
− | File:HawaUbeeScale10.JPG| | + | File:HawaUbeeScale10.JPG|Langstroth 10 Frame Equipment on top of scale|alt=alt language |
</gallery> | </gallery> | ||
Revision as of 20:56, 9 May 2017
Contents
OVERVIEW
The HawaUBee Scale utilizes all aluminum construction consisting of angle and flat material. This frame was designed keep production, material, and shipping costs to a minimum. The HawaUBee Scale is a light weight durable scale that requires only a screw driver to assemble. This scale is composed of 4 main pieces, 2 identical aluminum angle pieces act as the hive rails and 2 identical cross members constructed of flat aluminum stock. This scale may qualify as a production candidate in the future however, if you would like to construct this scale on your own I have uploaded a .pdf document with the measurements that will accommodate a 10 Frame Langstroth Beehive.
PRODUCTION
Production of this scale started out by creating a very accurate drill jig, this would allow me to make additional scales fairly quickly with acceptable accuracy. The aluminum angle pieces were cut to the exact same length and 4 holes were drilled in each piece of angle to accommodate the installation of the cross members. Aluminum flat stock was used to construct the cross members and 4 holes were drilled in each piece that would align with the holes drilled in the hive rails. The aluminum angle holes were then beveled to accept flathead screws allowing for a flush installation across the top of the rails where the bottom board of the hive will sit. The entire scale is held together with 8 screws that feed through the angle, cross members, and into the load cell. The cross members serve as the spacer required by the load cells. Since the load cells are threaded they conveniently act as a functional nut. Very simple construction with minimal waste.
SCALE LOCATION
HiveTool Scale: Not Yet Deployed
DEVELOPMENT AND FABRICATION PHOTOS
- Error creating thumbnail: File missing
Cutting Aluminum Angle for Hive Rails
- Error creating thumbnail: File missing
Creation of a drilling jig
- Error creating thumbnail: File missing
Drilling holes in the Hive Rails
- Error creating thumbnail: File missing
All Hive Assembly Pieces (stacked)
- Error creating thumbnail: File missing
Hive Rails and Cross Members (separated)
- Error creating thumbnail: File missing
Hive Rails and Cross Members (layout)
- Error creating thumbnail: File missing
Side View - Assembled
- Error creating thumbnail: File missing
Top View - Assembled
- Error creating thumbnail: File missing
Undercarriage - Assembled
- Error creating thumbnail: File missing
Langstroth 10 Frame Equipment on top of scale
DOWNLOADABLE PLANS
PARTS LIST
PROS/CONS/AVAILABILITY
CREATION CREDIT
David Hawa- HiveTool